Brakes wear gradually, so it's easy to get used to a problem without noticing. These are the signs worth acting on, and what a proper check looks like.
Warning signs
- Squealing when you brake. Many pads have a small metal wear indicator that squeals when the pad is getting thin.
- Grinding or scraping. This usually means the pad is worn through and metal is touching the disc. Get it checked straight away, because it damages the disc quickly.
- Vibration in the pedal or steering wheel when braking from speed. Often a sign the discs have uneven thickness.
- The car pulls to one side under braking. This can be a sticking caliper or uneven wear.
- A soft or spongy pedal. This could be air or moisture in the brake fluid, and it needs attention.
- A brake warning light on the dashboard.
What we check
We take the wheels off and measure. We don't guess. Pad thickness is measured on both sides, because the inner pad often wears faster and you can't see it from outside. Every disc has a minimum thickness set by the manufacturer, and we measure against it. We also check the disc surface, calipers, slider pins, hoses and the brake fluid.
Do discs always need replacing with pads?
No. If the disc is above its minimum thickness and the surface is even, new pads can go on the old discs. We replace discs when they're below the limit, badly scored, cracked or warped. You get photos and the measurements on WhatsApp, so you can see why.
How long do pads last?
It depends on the car, the pads and how you drive. City stop-and-go traffic wears pads much faster than highway driving. Rather than a fixed number, it's best to have them measured at every service.
Don't forget the brake fluid
Brake fluid absorbs moisture over time, which lowers its boiling point and can make the pedal feel soft. Your car maker's schedule says when it should be changed. We'll check it with every brake job.
Hearing a squeal or feeling a vibration? Message us on WhatsApp with your car model. We'll check it and send you an estimate before any work starts.